Description
Rod making machine, also known as wood powder forming machine, its products can be divided into wood chip rod making machine, rice husk rod making machine, sawdust rod making machine, etc., the equipment is the main molding equipment for the production of It can be less than 12% of the water content of bamboo, wood, fruit shells, straw (except rice stalk, wheat straw) and other granular waste (length ≤5mm, diameter ≤3mm), without adding any binder, after high temperature, high pressure process, extruded into a solid rod with a central hole.
model | power(kw) | heating power(kw) | finished product diameter(mm) | capacity(kg) | weight(kg) | dimensions(mm) |
RD-505 | 18.5 | 5.4 | 50/70 | 300-500 | 650 | 1700*550*1600 |
RD-506 | 22 | 5.4 | 50/70 | 400-600 | 750 | 1750*600*1830 |
RD-507 | 30 | 5.4 | 50/70 | 700-900 | 860 | 1800*710*1850 |
The available shape: cylindrical, square, hexagonal, hollow quadrangular, pentagon, pentagon with edge, hexagon with edge.
The available diameter could be: 45mm, 50mm,60mm,70mm,80mm with 15-20 mm hole in it and so on.
The available diameter could be: 45mm, 50mm,60mm,70mm,80mm with 15-20 mm hole in it and so on.
Raw Materials & Finished Products
( Size: 0-5mm Moisture Content: 8%-12% )
►Besides the material size must less than 5mm, the humidity of the raw materials is controlled in 8-12%.
►Too wet or too dry will cause a bad forming effect.
►If the material too big, we will recommend you crusher according to your requirement.
►If your material moisture over 12%, we have a sawdust drying machine. After crushing, the material was delivered to the drying machine, then it was sent to forming machine.
If you are not sure if the material is qualified, please contact us
►Besides the material size must less than 5mm, the humidity of the raw materials is controlled in 8-12%.
►Too wet or too dry will cause a bad forming effect.
►If the material too big, we will recommend you crusher according to your requirement.
►If your material moisture over 12%, we have a sawdust drying machine. After crushing, the material was delivered to the drying machine, then it was sent to forming machine.
If you are not sure if the material is qualified, please contact us
The feature of the Final Product:
Specific gravity: 1300—1900kg/m
Calorific value: 4500—5000kcal/kg
Specific gravity: 1300—1900kg/m
Calorific value: 4500—5000kcal/kg
The sawdust produces free radicals, bifunctional under the hot and high pressure condition of the briquettes making machine.
The sawdust can be combined each other closely through a covalent bond.once formed, the combination will remain stable in case
there is no external damage, more stable after cooling.
It can used as fuel, boiler heating, cooking, and other field.
Especially after carbonized, not only it has long burning time, but also smokeless, smelless, clean, widely used in barbecue market.
The sawdust can be combined each other closely through a covalent bond.once formed, the combination will remain stable in case
there is no external damage, more stable after cooling.
It can used as fuel, boiler heating, cooking, and other field.
Especially after carbonized, not only it has long burning time, but also smokeless, smelless, clean, widely used in barbecue market.
Advantages
Screw propeller
1.The most important parts of the machine,also call screw propeller.
2.It is made from the special chrome alloy and it has the advantage of wear-resistant,high pressure resistance,high abrasion resistance.special wear-resisting material life for more than ten times higher than that of traditional thruster.
2.It is made from the special chrome alloy and it has the advantage of wear-resistant,high pressure resistance,high abrasion resistance.special wear-resisting material life for more than ten times higher than that of traditional thruster.
Mould
1.It is decide the shape, diameter of the final product, and for thr shape, we have square, hexagonal, hexagonal with edge.
2.The barrel made from the tungsten alloy, and the thickness of the mould barrel is 12mm, length is 380-450cm, diameter from 50-70mm.
3.For making charcoal, the diameter 50-60mm will be better, and for the briquette fuel, we can choose from 50-70mm.
2.The barrel made from the tungsten alloy, and the thickness of the mould barrel is 12mm, length is 380-450cm, diameter from 50-70mm.
3.For making charcoal, the diameter 50-60mm will be better, and for the briquette fuel, we can choose from 50-70mm.
Reviews
There are no reviews yet.